If you have any feedback on how we can make our new website better please do contact us and we would like to hear from you. 
 

5 

THERMO-SHIELD® 
ACYLIC FLEX-TAC  #5972
                                                                                                         
 
DESCRIPTION 
Thermo-Shield® Acrylic Flex-Tac is a primer to be used over bitumen surfaces prior to the application of Thermo-Shield® Roof or Exterior Coats.

 

APPLICATION (1 Coat)  
Apply the Acrylic Flex-Tac by roller or airless sprayer on a clean surface at approximately 6.22 square meters per gallon in one coat application.  Allow drying time for a minimum of 12 hours before the application of Thermo-Shield® Roof or Exterior Coats.  Do not apply in freezing weather or when precipitation is imminent.

 

CLEAN UP  
Use soap and warm water to clean tools and equipment.  Rinse with clean fresh water.

 

STORAGE AND PACKING  
Store the 5 gallon pails in a warehouse or room at temperature between 5 ºC – 30 ºC (41 and 86 Deg F)

PRODUCT CODE
ACRYLIC FLEX TAC:  5972

flx_tac1_small flx_tac2_small flx_tac3_small

 Bitumen                                     Flex-Tac application                    Roof Coat

 

 

 

www.thermoshield.com

spm@thermoshield.com

                                                                                                                      logo_home      

                                                                             WARNING
 
4915 Rattlesnake Hammock Rd. #266, Naples, Florida 34113 USA   
Ph: 239-234-5832 / Fax: 239-236-6767  
www.thermoshield.com   spm@thermoshield.com
  Site Map